Boost C++ Libraries

...one of the most highly regarded and expertly designed C++ library projects in the world. Herb Sutter and Andrei Alexandrescu, C++ Coding Standards

This is the documentation for an old version of Boost. Click here to view this page for the latest version.
PrevUpHomeNext

Generic Iterators

Iterator Facade
Reference
Tutorial
Iterator Adaptor
Reference
Tutorial

While the iterator interface is rich, there is a core subset of the interface that is necessary for all the functionality. We have identified the following core behaviors for iterators:

  • dereferencing
  • incrementing
  • decrementing
  • equality comparison
  • random-access motion
  • distance measurement

In addition to the behaviors listed above, the core interface elements include the associated types exposed through iterator traits: value_type, reference, difference_type, and iterator_category.

Iterator facade uses the Curiously Recurring Template Pattern (CRTP) [Cop95]_ so that the user can specify the behavior of iterator_facade in a derived class. Former designs used policy objects to specify the behavior, but that approach was discarded for several reasons:

1. the creation and eventual copying of the policy object may create overhead that can be avoided with the current approach.

2. The policy object approach does not allow for custom constructors on the created iterator types, an essential feature if iterator_facade should be used in other library implementations.

3. Without the use of CRTP, the standard requirement that an iterator's operator++ returns the iterator type itself would mean that all iterators built with the library would have to be specializations of iterator_facade<...>, rather than something more descriptive like indirect_iterator<T*>. Cumbersome type generator metafunctions would be needed to build new parameterized iterators, and a separate iterator_adaptor layer would be impossible.

Usage

The user of iterator_facade derives his iterator class from a specialization of iterator_facade and passes the derived iterator class as iterator_facade's first template parameter. The order of the other template parameters have been carefully chosen to take advantage of useful defaults. For example, when defining a constant lvalue iterator, the user can pass a const-qualified version of the iterator's value_type as iterator_facade's Value parameter and omit the Reference parameter which follows.

The derived iterator class must define member functions implementing the iterator's core behaviors. The following table describes expressions which are required to be valid depending on the category of the derived iterator type. These member functions are described briefly below and in more detail in the iterator facade requirements.

Table 1.10. Core Interface

Expression

Effects

i.dereference()

Access the value referred to

i.equal(j)

Compare for equality with j

i.increment()

Advance by one position

i.decrement()

Retreat by one position

i.advance(n)

Advance by n positions

i.distance_to(j)

Measure the distance to j


In addition to implementing the core interface functions, an iterator derived from iterator_facade typically defines several constructors. To model any of the standard iterator concepts, the iterator must at least have a copy constructor. Also, if the iterator type X is meant to be automatically interoperate with another iterator type Y (as with constant and mutable iterators) then there must be an implicit conversion from X to Y or from Y to X (but not both), typically implemented as a conversion constructor. Finally, if the iterator is to model Forward Traversal Iterator or a more-refined iterator concept, a default constructor is required.

Iterator Core Access

iterator_facade and the operator implementations need to be able to access the core member functions in the derived class. Making the core member functions public would expose an implementation detail to the user. The design used here ensures that implementation details do not appear in the public interface of the derived iterator type.

Preventing direct access to the core member functions has two advantages. First, there is no possibility for the user to accidently use a member function of the iterator when a member of the value_type was intended. This has been an issue with smart pointer implementations in the past. The second and main advantage is that library implementers can freely exchange a hand-rolled iterator implementation for one based on iterator_facade without fear of breaking code that was accessing the public core member functions directly.

In a naive implementation, keeping the derived class' core member functions private would require it to grant friendship to iterator_facade and each of the seven operators. In order to reduce the burden of limiting access, iterator_core_access is provided, a class that acts as a gateway to the core member functions in the derived iterator class. The author of the derived class only needs to grant friendship to iterator_core_access to make his core member functions available to the library.

iterator_core_access will be typically implemented as an empty class containing only private static member functions which invoke the iterator core member functions. There is, however, no need to standardize the gateway protocol. Note that even if iterator_core_access used public member functions it would not open a safety loophole, as every core member function preserves the invariants of the iterator.

operator[]

The indexing operator for a generalized iterator presents special challenges. A random access iterator's operator[] is only required to return something convertible to its value_type. Requiring that it return an lvalue would rule out currently-legal random-access iterators which hold the referenced value in a data member (e.g. |counting|_), because *(p+n) is a reference into the temporary iterator p+n, which is destroyed when operator[] returns.

.. |counting| replace:: counting_iterator

Writable iterators built with iterator_facade implement the semantics required by the preferred resolution to issue 299_ and adopted by proposal n1550_: the result of p[n] is an object convertible to the iterator's value_type, and p[n] = x is equivalent to *(p + n) = x (Note: This result object may be implemented as a proxy containing a copy of p+n). This approach will work properly for any random-access iterator regardless of the other details of its implementation. A user who knows more about the implementation of her iterator is free to implement an operator[] that returns an lvalue in the derived iterator class; it will hide the one supplied by iterator_facade from clients of her iterator.

.. _n1550: http://www.open-std.org/JTC1/SC22/WG21/docs/papers/2003/n1550.htm

.. _issue 299: http://www.open-std.org/jtc1/sc22/wg21/docs/lwg-active.html#299

.. _operator arrow:

operator->

The reference type of a readable iterator (and today's input iterator) need not in fact be a reference, so long as it is convertible to the iterator's value_type. When the value_type is a class, however, it must still be possible to access members through operator->. Therefore, an iterator whose reference type is not in fact a reference must return a proxy containing a copy of the referenced value from its operator->.

The return types for iterator_facade's operator-> and operator[] are not explicitly specified. Instead, those types are described in terms of a set of requirements, which must be satisfied by the iterator_facade implementation.

.. [Cop95] [Coplien, 1995] Coplien, J., Curiously Recurring Template Patterns, C++ Report, February 1995, pp. 24-27.

template <
    class Derived
  , class Value
  , class CategoryOrTraversal
  , class Reference  = Value&
  , class Difference = ptrdiff_t
>
class iterator_facade {
 public:
    typedef remove_const<Value>::type value_type;
    typedef Reference reference;
    typedef Value\* pointer;
    typedef Difference difference_type;
    typedef /* see below__ \*/ iterator_category;

    reference operator\*() const;
    /* see below__ \*/ operator->() const;
    /* see below__ \*/ operator[](difference_type n) const;
    Derived& operator++();
    Derived operator++(int);
    Derived& operator--();
    Derived operator--(int);
    Derived& operator+=(difference_type n);
    Derived& operator-=(difference_type n);
    Derived operator-(difference_type n) const;
 protected:
    typedef iterator_facade iterator_facade\_;
};

// Comparison operators
template <class Dr1, class V1, class TC1, class R1, class D1,
          class Dr2, class V2, class TC2, class R2, class D2>
typename enable_if_interoperable<Dr1,Dr2,bool>::type // exposition
operator ==(iterator_facade<Dr1,V1,TC1,R1,D1> const& lhs,
            iterator_facade<Dr2,V2,TC2,R2,D2> const& rhs);

template <class Dr1, class V1, class TC1, class R1, class D1,
          class Dr2, class V2, class TC2, class R2, class D2>
typename enable_if_interoperable<Dr1,Dr2,bool>::type
operator !=(iterator_facade<Dr1,V1,TC1,R1,D1> const& lhs,
            iterator_facade<Dr2,V2,TC2,R2,D2> const& rhs);

template <class Dr1, class V1, class TC1, class R1, class D1,
          class Dr2, class V2, class TC2, class R2, class D2>
typename enable_if_interoperable<Dr1,Dr2,bool>::type
operator <(iterator_facade<Dr1,V1,TC1,R1,D1> const& lhs,
           iterator_facade<Dr2,V2,TC2,R2,D2> const& rhs);

template <class Dr1, class V1, class TC1, class R1, class D1,
          class Dr2, class V2, class TC2, class R2, class D2>
typename enable_if_interoperable<Dr1,Dr2,bool>::type
operator <=(iterator_facade<Dr1,V1,TC1,R1,D1> const& lhs,
            iterator_facade<Dr2,V2,TC2,R2,D2> const& rhs);

template <class Dr1, class V1, class TC1, class R1, class D1,
          class Dr2, class V2, class TC2, class R2, class D2>
typename enable_if_interoperable<Dr1,Dr2,bool>::type
operator >(iterator_facade<Dr1,V1,TC1,R1,D1> const& lhs,
           iterator_facade<Dr2,V2,TC2,R2,D2> const& rhs);

template <class Dr1, class V1, class TC1, class R1, class D1,
          class Dr2, class V2, class TC2, class R2, class D2>
typename enable_if_interoperable<Dr1,Dr2,bool>::type
operator >=(iterator_facade<Dr1,V1,TC1,R1,D1> const& lhs,
            iterator_facade<Dr2,V2,TC2,R2,D2> const& rhs);

// Iterator difference
template <class Dr1, class V1, class TC1, class R1, class D1,
          class Dr2, class V2, class TC2, class R2, class D2>
/* see below__ \*/
operator-(iterator_facade<Dr1,V1,TC1,R1,D1> const& lhs,
          iterator_facade<Dr2,V2,TC2,R2,D2> const& rhs);

// Iterator addition
template <class Dr, class V, class TC, class R, class D>
Derived operator+ (iterator_facade<Dr,V,TC,R,D> const&,
                   typename Derived::difference_type n);

template <class Dr, class V, class TC, class R, class D>
Derived operator+ (typename Derived::difference_type n,
                   iterator_facade<Dr,V,TC,R,D> const&);

__ iterator category_

__ operator arrow_

__ brackets_

__ minus_

.. _iterator category:

The iterator_category member of iterator_facade is

.. parsed-literal::

*iterator-category*\ (CategoryOrTraversal, reference, value_type)

where iterator-category is defined as follows:

.. include:: facade_iterator_category.rst

The enable_if_interoperable template used above is for exposition purposes. The member operators should only be in an overload set provided the derived types Dr1 and Dr2 are interoperable, meaning that at least one of the types is convertible to the other. The enable_if_interoperable approach uses SFINAE to take the operators out of the overload set when the types are not interoperable. The operators should behave as-if enable_if_interoperable were defined to be:

template <bool, typename> enable_if_interoperable_impl
{};

template <typename T> enable_if_interoperable_impl<true,T>
{ typedef T type; };

template<typename Dr1, typename Dr2, typename T>
struct enable_if_interoperable
  : enable_if_interoperable_impl<
        is_convertible<Dr1,Dr2>::value || is_convertible<Dr2,Dr1>::value
      , T
    >
{};

Requirements

The following table describes the typical valid expressions on iterator_facade's Derived parameter, depending on the iterator concept(s) it will model. The operations in the first column must be made accessible to member functions of class iterator_core_access. In addition, static_cast<Derived*>(iterator_facade*) shall be well-formed.

In the table below, F is iterator_facade<X,V,C,R,D>, a is an object of type X, b and c are objects of type const X, n is an object of F::difference_type, y is a constant object of a single pass iterator type interoperable with X, and z is a constant object of a random access traversal iterator type interoperable with X.

.. _core operations:

.. topic:: iterator_facade Core Operations

Table 1.11. Core Operations

Expression

Return Type

Assertion/Note

Used to implement Iterator Concept(s)

c.dereference()

F::reference

Readable Iterator, Writable Iterator

c.equal(y)

convertible to bool

true iff c and y refer to the same position

Single Pass Iterator

a.increment()

unused

Incrementable Iterator

a.decrement()

unused

Bidirectional Traversal Iterator

a.advance(n)

unused

Random Access Traversal Iterator

c.distance_to(z)

convertible to F::difference_type

equivalent to distance(c, X(z)).

Random Access Traversal Iterator


Operations

The operations in this section are described in terms of operations on the core interface of Derived which may be inaccessible (i.e. private). The implementation should access these operations through member functions of class iterator_core_access.

reference operator*() const;

Returns: static_cast<Derived const*>(this)->dereference()

operator->() const; (see below__)

__ operator arrow_

Returns: If reference is a reference type, an object of type pointer equal to: &static_cast<Derived const*>(this)->dereference() Otherwise returns an object of unspecified type such that, (*static_cast<Derived const*>(this))->m is equivalent to (w = **static_cast<Derived const*>(this), w.m) for some temporary object w of type value_type.

.. _brackets:

*unspecified* operator[](difference_type n) const;

Returns: an object convertible to value_type. For constant objects v of type value_type, and n of type difference_type, (*this)[n] = v is equivalent to *(*this + n) = v, and static_cast<value_type const&>((*this)[n]) is equivalent to static_cast<value_type const&>(*(*this + n))

Derived& operator++();

Effects:

  static_cast<Derived*>(this)->increment();
  return *static_cast<Derived*>(this);

Derived operator++(int);

Effects:

  Derived tmp(static_cast<Derived const*>(this));
  ++*this;
  return tmp;

Derived& operator--();

Effects:

    static_cast<Derived*>(this)->decrement();
    return *static_cast<Derived*>(this);

Derived operator--(int);

Effects:

  Derived tmp(static_cast<Derived const*>(this));
  --*this;
  return tmp;


Derived& operator+=(difference_type n);

Effects:

    static_cast<Derived*>(this)->advance(n);
    return *static_cast<Derived*>(this);


Derived& operator-=(difference_type n);

Effects:

    static_cast<Derived*>(this)->advance(-n);
    return *static_cast<Derived*>(this);


Derived operator-(difference_type n) const;

Effects:

  Derived tmp(static_cast<Derived const*>(this));
  return tmp -= n;

template <class Dr, class V, class TC, class R, class D>
Derived operator+ (iterator_facade<Dr,V,TC,R,D> const&,
                   typename Derived::difference_type n);

template <class Dr, class V, class TC, class R, class D>
Derived operator+ (typename Derived::difference_type n,
                   iterator_facade<Dr,V,TC,R,D> const&);

Effects:

  Derived tmp(static_cast<Derived const*>(this));
  return tmp += n;

template <class Dr1, class V1, class TC1, class R1, class D1,
          class Dr2, class V2, class TC2, class R2, class D2>
typename enable_if_interoperable<Dr1,Dr2,bool>::type
operator ==(iterator_facade<Dr1,V1,TC1,R1,D1> const& lhs,
            iterator_facade<Dr2,V2,TC2,R2,D2> const& rhs);

Returns:

  if is_convertible<Dr2,Dr1>::value

  then
    ((Dr1 const&)lhs).equal((Dr2 const&)rhs).

  Otherwise,
    ((Dr2 const&)rhs).equal((Dr1 const&)lhs).
template <class Dr1, class V1, class TC1, class R1, class D1,
          class Dr2, class V2, class TC2, class R2, class D2>
typename enable_if_interoperable<Dr1,Dr2,bool>::type
operator !=(iterator_facade<Dr1,V1,TC1,R1,D1> const& lhs,
            iterator_facade<Dr2,V2,TC2,R2,D2> const& rhs);

Returns:

  if is_convertible<Dr2,Dr1>::value

  then
    !((Dr1 const&)lhs).equal((Dr2 const&)rhs).

  Otherwise,
    !((Dr2 const&)rhs).equal((Dr1 const&)lhs).
template <class Dr1, class V1, class TC1, class R1, class D1,
          class Dr2, class V2, class TC2, class R2, class D2>
typename enable_if_interoperable<Dr1,Dr2,bool>::type
operator <(iterator_facade<Dr1,V1,TC1,R1,D1> const& lhs,
           iterator_facade<Dr2,V2,TC2,R2,D2> const& rhs);

Returns:

  if is_convertible<Dr2,Dr1>::value

  then
    ((Dr1 const&)lhs).distance_to((Dr2 const&)rhs) < 0.

  Otherwise,
    ((Dr2 const&)rhs).distance_to((Dr1 const&)lhs) > 0.
template <class Dr1, class V1, class TC1, class R1, class D1,
          class Dr2, class V2, class TC2, class R2, class D2>
typename enable_if_interoperable<Dr1,Dr2,bool>::type
operator <=(iterator_facade<Dr1,V1,TC1,R1,D1> const& lhs,
            iterator_facade<Dr2,V2,TC2,R2,D2> const& rhs);

Returns:

  if is_convertible<Dr2,Dr1>::value

  then
    ((Dr1 const&)lhs).distance_to((Dr2 const&)rhs) <= 0.

  Otherwise,
    ((Dr2 const&)rhs).distance_to((Dr1 const&)lhs) >= 0.
template <class Dr1, class V1, class TC1, class R1, class D1,
          class Dr2, class V2, class TC2, class R2, class D2>
typename enable_if_interoperable<Dr1,Dr2,bool>::type
operator >(iterator_facade<Dr1,V1,TC1,R1,D1> const& lhs,
           iterator_facade<Dr2,V2,TC2,R2,D2> const& rhs);

Returns:

  if is_convertible<Dr2,Dr1>::value

  then
    ((Dr1 const&)lhs).distance_to((Dr2 const&)rhs) > 0.

  Otherwise,
    ((Dr2 const&)rhs).distance_to((Dr1 const&)lhs) < 0.
template <class Dr1, class V1, class TC1, class R1, class D1,
          class Dr2, class V2, class TC2, class R2, class D2>
typename enable_if_interoperable<Dr1,Dr2,bool>::type
operator >=(iterator_facade<Dr1,V1,TC1,R1,D1> const& lhs,
            iterator_facade<Dr2,V2,TC2,R2,D2> const& rhs);

Returns:

  if is_convertible<Dr2,Dr1>::value

  then
    ((Dr1 const&)lhs).distance_to((Dr2 const&)rhs) >= 0.

  Otherwise,
    ((Dr2 const&)rhs).distance_to((Dr1 const&)lhs) <= 0.

.. _minus:

template <class Dr1, class V1, class TC1, class R1, class D1,
          class Dr2, class V2, class TC2, class R2, class D2>
typename enable_if_interoperable<Dr1,Dr2,difference>::type
operator -(iterator_facade<Dr1,V1,TC1,R1,D1> const& lhs,
           iterator_facade<Dr2,V2,TC2,R2,D2> const& rhs);

Return Type:

  if is_convertible<Dr2,Dr1>::value

   then
    difference shall be
    iterator_traits<Dr1>::difference_type.

   Otherwise
    difference shall be iterator_traits<Dr2>::difference_type

Returns:

  if is_convertible<Dr2,Dr1>::value

  then
    -((Dr1 const&)lhs).distance_to((Dr2 const&)rhs).

  Otherwise,
    ((Dr2 const&)rhs).distance_to((Dr1 const&)lhs).

In this section we'll walk through the implementation of a few iterators using iterator_facade, based around the simple example of a linked list of polymorphic objects. This example was inspired by a posting by Keith Macdonald on the Boost-Users mailing list.

The Problem

Say we've written a polymorphic linked list node base class:

# include <iostream>

struct node_base
{
    node_base() : m_next(0) {}

    // Each node manages all of its tail nodes
    virtual ~node_base() { delete m_next; }

    // Access the rest of the list
    node_base* next() const { return m_next; }

    // print to the stream
    virtual void print(std::ostream& s) const = 0;

    // double the value
    virtual void double_me() = 0;

    void append(node_base* p)
    {
        if (m_next)
            m_next->append(p);
        else
            m_next = p;
    }

 private:
    node_base* m_next;
};

Lists can hold objects of different types by linking together specializations of the following template:

template <class T>
struct node : node_base
{
    node(T x)
      : m_value(x)
    {}

    void print(std::ostream& s) const { s << this->m_value; }
    void double_me() { m_value += m_value; }

 private:
    T m_value;
};

And we can print any node using the following streaming operator:

inline std::ostream& operator<<(std::ostream& s, node_base const& n)
{
    n.print(s);
    return s;
}

Our first challenge is to build an appropriate iterator over these lists.

A Basic Iterator Using iterator_facade

We will construct a node_iterator class using inheritance from iterator_facade to implement most of the iterator's operations.

# include "node.hpp"
# include <boost/iterator/iterator_facade.hpp>

class node_iterator
  : public boost::iterator_facade<...>
{
   ...
};

Template Arguments for iterator_facade

iterator_facade has several template parameters, so we must decide what types to use for the arguments. The parameters are Derived, Value, CategoryOrTraversal, Reference, and Difference.

Derived

Because iterator_facade is meant to be used with the CRTP [Cop95]_ the first parameter is the iterator class name itself, node_iterator.

Value

The Value parameter determines the node_iterator's value_type. In this case, we are iterating over node_base objects, so Value will be node_base.

CategoryOrTraversal

Now we have to determine which iterator traversal concept_ our node_iterator is going to model. Singly-linked lists only have forward links, so our iterator can't can't be a bidirectional traversal iterator_. Our iterator should be able to make multiple passes over the same linked list (unlike, say, an istream_iterator which consumes the stream it traverses), so it must be a forward traversal iterator_. Therefore, we'll pass boost::forward_traversal_tag in this position _.

.. iterator_facade also supports old-style category tags, so we could have passed std::forward_iterator_tag here; either way, the resulting iterator's iterator_category will end up being std::forward_iterator_tag.

Reference

The Reference argument becomes the type returned by node_iterator's dereference operation, and will also be the same as std::iterator_traits<node_iterator>::reference. The library's default for this parameter is Value&; since node_base& is a good choice for the iterator's reference type, we can omit this argument, or pass use_default.

Difference

The Difference argument determines how the distance between two node_iterators will be measured and will also be the same as std::iterator_traits<node_iterator>::difference_type. The library's default for Difference is std::ptrdiff_t, an appropriate type for measuring the distance between any two addresses in memory, and one that works for almost any iterator, so we can omit this argument, too.

The declaration of node_iterator will therefore look something like:

# include "node.hpp"
# include <boost/iterator/iterator_facade.hpp>

class node_iterator
  : public boost::iterator_facade<
        node_iterator
      , node_base
      , boost::forward_traversal_tag
    >
{
   ...
};

Constructors and Data Members

Next we need to decide how to represent the iterator's position. This representation will take the form of data members, so we'll also need to write constructors to initialize them. The node_iterator's position is quite naturally represented using a pointer to a node_base. We'll need a constructor to build an iterator from a node_base*, and a default constructor to satisfy the forward traversal iterator_ requirements _. Our node_iterator then becomes:

# include "node.hpp"
# include <boost/iterator/iterator_facade.hpp>

class node_iterator
  : public boost::iterator_facade<
        node_iterator
      , node_base
      , boost::forward_traversal_tag
    >
{
 public:
    node_iterator()
      : m_node(0)
    {}

    explicit node_iterator(node_base* p)
      : m_node(p)
    {}

 private:
    ...
    node_base* m_node;
};

.. Technically, the C++ standard places almost no requirements on a default-constructed iterator, so if we were really concerned with efficiency, we could've written the default constructor to leave m_node uninitialized.

Implementing the Core Operations

The last step is to implement the core operations_ required by the concepts we want our iterator to model. Referring to the table__, we can see that the first three rows are applicable because node_iterator needs to satisfy the requirements for readable iterator_, single pass iterator_, and incrementable iterator_.

__ core operations_

We therefore need to supply dereference, equal, and increment members. We don't want these members to become part of node_iterator's public interface, so we can make them private and grant friendship to boost::iterator_core_access, a "back-door" that iterator_facade uses to get access to the core operations:

# include "node.hpp"
# include <boost/iterator/iterator_facade.hpp>

class node_iterator
  : public boost::iterator_facade<
        node_iterator
      , node_base
      , boost::forward_traversal_tag
    >
{
 public:
    node_iterator()
      : m_node(0) {}

    explicit node_iterator(node_base* p)
      : m_node(p) {}

 private:
    friend class boost::iterator_core_access;

    void increment() { m_node = m_node->next(); }

    bool equal(node_iterator const& other) const
    {
        return this->m_node == other.m_node;
    }

    node_base& dereference() const { return *m_node; }

    node_base* m_node;
};

Voila; a complete and conforming readable, forward-traversal iterator! For a working example of its use, see this program.

__ ../example/node_iterator1.cpp

A constant node_iterator

Constant and Mutable iterators

The term **mutable iterator** means an iterator through which the object it references (its "referent") can be modified. A **constant iterator** is one which doesn't allow modification of its referent.

The words constant and mutable don't refer to the ability to modify the iterator itself. For example, an int const* is a non-const constant iterator, which can be incremented but doesn't allow modification of its referent, and int* const is a const mutable iterator, which cannot be modified but which allows modification of its referent.

Confusing? We agree, but those are the standard terms. It probably doesn't help much that a container's constant iterator is called const_iterator.

Now, our node_iterator gives clients access to both node\ 's print(std::ostream&) const member function, but also its mutating double_me() member. If we wanted to build a constant node_iterator, we'd only have to make three changes:

class const_node_iterator
  : public boost::iterator_facade<
        const_node_iterator
      , node_base **const**
      , boost::forward_traversal_tag
    >
{
 public:
    const_node_iterator()
      : m_node(0) {}

    explicit const_node_iterator(node_base* p)
      : m_node(p) {}

 private:
    friend class boost::iterator_core_access;

    void increment() { m_node = m_node->next(); }

    bool equal(const_node_iterator const& other) const
    {
        return this->m_node == other.m_node;
    }

    node_base **const**\ & dereference() const { return \*m_node; }

    node_base **const**\ * m_node;
};

const and an iterator's value_type

The C++ standard requires an iterator's value_type not be const-qualified, so iterator_facade strips the const from its Value parameter in order to produce the iterator's value_type. Making the Value argument const provides a useful hint to iterator_facade that the iterator is a constant iterator, and the default Reference argument will be correct for all lvalue iterators.

As a matter of fact, node_iterator and const_node_iterator are so similar that it makes sense to factor the common code out into a template as follows:

template <class Value>
class node_iter
  : public boost::iterator_facade<
        node_iter<Value>
      , Value
      , boost::forward_traversal_tag
    >
{
 public:
    node_iter()
      : m_node(0) {}

    explicit node_iter(Value* p)
      : m_node(p) {}

 private:
    friend class boost::iterator_core_access;

    bool equal(node_iter<Value> const& other) const
    {
        return this->m_node == other.m_node;
    }

    void increment()
    { m_node = m_node->next(); }

    Value& dereference() const
    { return *m_node; }

    Value* m_node;
};
typedef node_iter<node_base> node_iterator;
typedef node_iter<node_base const> node_const_iterator;

Interoperability

Our const_node_iterator works perfectly well on its own, but taken together with node_iterator it doesn't quite meet expectations. For example, we'd like to be able to pass a node_iterator where a node_const_iterator was expected, just as you can with std::list<int>'s iterator and const_iterator. Furthermore, given a node_iterator and a node_const_iterator into the same list, we should be able to compare them for equality.

This expected ability to use two different iterator types together is known as |interoperability|_. Achieving interoperability in our case is as simple as templatizing the equal function and adding a templatized converting constructor _ _:

template <class Value>
class node_iter
  : public boost::iterator_facade<
        node_iter<Value>
      , Value
      , boost::forward_traversal_tag
    >
{
 public:
    node_iter()
      : m_node(0) {}

    explicit node_iter(Value* p)
      : m_node(p) {}

    template <class OtherValue>
    node_iter(node_iter<OtherValue> const& other)
      : m_node(other.m_node) {}

 private:
    friend class boost::iterator_core_access;
    template <class> friend class node_iter;

    template <class OtherValue>
    bool equal(node_iter<OtherValue> const& other) const
    {
        return this->m_node == other.m_node;
    }

    void increment()
    { m_node = m_node->next(); }

    Value& dereference() const
    { return *m_node; }

    Value* m_node;
};
typedef impl::node_iterator<node_base> node_iterator;
typedef impl::node_iterator<node_base const> node_const_iterator;

.. |interoperability| replace:: **interoperability** .. _interoperability: new-iter-concepts.html#interoperable-iterators-lib-interoperable-iterators

.. If you're using an older compiler and it can't handle this example, see the example code__ for workarounds.

.. If node_iterator had been a random access traversal iterator_, we'd have had to templatize its distance_to function as well.

__ ../example/node_iterator2.hpp

You can see an example program which exercises our interoperable iterators here.

Telling the Truth

Now node_iterator and node_const_iterator behave exactly as you'd expect... almost. We can compare them and we can convert in one direction: from node_iterator to node_const_iterator. If we try to convert from node_const_iterator to node_iterator, we'll get an error when the converting constructor tries to initialize node_iterator's m_node, a node* with a node const*. So what's the problem?

The problem is that boost::|is_convertible|_<node_const_iterator,node_iterator>::value will be true, but it should be false. |is_convertible|_ lies because it can only see as far as the declaration of node_iter's converting constructor, but can't look inside at the definition to make sure it will compile. A perfect solution would make node_iter's converting constructor disappear when the m_node conversion would fail.

.. |is_convertible| replace:: is_convertible .. _is_convertible: ../../type_traits/index.html#relationships

In fact, that sort of magic is possible using |enable_if|__. By rewriting the converting constructor as follows, we can remove it from the overload set when it's not appropriate:

#include <boost/type_traits/is_convertible.hpp>
#include <boost/utility/enable_if.hpp>

  ...

private:
  struct enabler {};

public:
  template <class OtherValue>
  node_iter(
      node_iter<OtherValue> const& other
    , typename boost::enable_if<
          boost::is_convertible<OtherValue*,Value*>
        , enabler
      >::type = enabler()
  )
    : m_node(other.m_node) {}

.. |enable_if| replace:: boost::enable_if __ ../../utility/enable_if.html

Wrap Up

This concludes our iterator_facade tutorial, but before you stop reading we urge you to take a look at |iterator_adaptor|__. There's another way to approach writing these iterators which might even be superior.

.. |iterator_adaptor| replace:: iterator_adaptor __ iterator_adaptor.html

.. _iterator traversal concept: new-iter-concepts.html#iterator-traversal-concepts-lib-iterator-traversal .. _readable iterator: new-iter-concepts.html#readable-iterators-lib-readable-iterators .. _lvalue iterator: new-iter-concepts.html#lvalue-iterators-lib-lvalue-iterators .. _single pass iterator: new-iter-concepts.html#single-pass-iterators-lib-single-pass-iterators .. _incrementable iterator: new-iter-concepts.html#incrementable-iterators-lib-incrementable-iterators .. _forward traversal iterator: new-iter-concepts.html#forward-traversal-iterators-lib-forward-traversal-iterators .. _bidirectional traversal iterator: new-iter-concepts.html#bidirectional-traversal-iterators-lib-bidirectional-traversal-iterators .. _random access traversal iterator: new-iter-concepts.html#random-access-traversal-iterators-lib-random-access-traversal-iterators


PrevUpHomeNext